• 1 – Introduction to KNX, System Arguments, Topology and Communication

  16 Lessonsin KNX Control Basic complete

  • KNX basic training part 1 - €24,95 Ex. VAT.

  In this lesson you will become acquainted with the application area of ​​KNX. You learn about the system structure and the operation and principle of a KNX system. We are going to look at the points of attention for selecting the cabling. Within an installation you link participants together by selecting the correct cable, but when the installation increases in size there is a chance that you will have to use line zone couplers. So you start building an installation and the arguments that go with it. We are going to look at the type of communication that is possible within KNX. In addition to the advantages, some also have disadvantages.

• 2 – Bus participants, cabling and distribution box

  9 Lessonsin KNX Control Basic complete

  • KNX basic training part 2 - €24,95 Ex. VAT.

  The KNX protocol has many components that can be linked. There are various suppliers who are allowed to make and supply KNX components. There are about 500 Manufacturers and more than a thousand KNX registered/certified products on the rise. This is only possible by putting a good protocol behind it. KNX is this protocol and therefore have market share within the home automation sector. In this lesson we will look at the various components and type of cabling. We also look at the contents of a distribution box. We will look at what you need to take into account when assembling a distribution box.

• 3 – Telegrams and Diagnosis

  6 Lessonsin KNX Control Basic complete

  • KNX basic training part 3 - €24,95 Ex. VAT.

  Within KNX, there is a certain way of communicating. Communication is by telegrams. These telegrams contain a diversity of information which is necessary, for example, to allow the actor to respond to the command given by, for example, the bus pusher. In this chapter we take a closer look at the basics of telegrams and look at the content of information.

• 4 – Programming with ETS6

  13 Lessonsin KNX Control Basic complete

  • KNX basic training part 4 (ETS6) - €34,95 Ex. VAT.

  In addition to the certified products made by the suppliers, a piece of software is needed that ensures that it actually starts talking to each other. This is the package of KNX ETS6. The 6 already indicates that this is not the only version. The first version came on the market in 1993. The most recent version is the ETS6, also the version we will work with in this course. There will be an explanation of how ETS6 functions and how you can program it. You learn the logical steps so that the software functions optimally. You can create a simple program and upload it to the controller at the end of the lesson. You will be taught the most important function you need.

Take the whole course and save!

Online KNX training Complete (parts 1 to 4)